Silicone 5050 Light Strip Joiner
The Silicone 5050 Joiner has been created to easily join two Driverless 5050 LED Light Strips. To create a waterproof connection waterproofing compound is required. The Joiner is made from high grade rigid silicone with UV protection, to help protect the strip and prevent discoloration or corrosion.
To Install: First grab a pair of disposable gloves and put them on. Then add a pea sized ring of waterproofing compound around the inside of the joiner and insert the strip into the joiner until the strip stops at the back. Take a small amount of waterproofing compound on on your finger and smear it around the entire joiner mouth where the strip was inserted. Repeat on the other end of the joiner with the second piece of LED strip. Recap the waterproofing compound and place the strip out of the way. We recommend leaving the strip alone for at least 12 hours to dry thoroughly.
We recommend using the Joiner for creating a seamless connection with any Driverless 5050 LED Strip Lights.
Warranty | 3 Years | |
Weight | 0.05 lbs | |
Dimensions | 12mm X 7mm | |
IP Rating | IP67 when used with optional Silicone Glue | |
Product Color | Transparent Silicone | |
Working Temperature | -20-140F | |
Certificates | CE, RoHS |