5050 Power Connector
The 5050 Power Connector has been created to easily bring power to any Driverless 5050 LED Light Strips. The total length of the power connector is 60" and can power up to 165 continuous driverless 5050 strip. Using waterproof glue, a fully waterproof seal can be created. UV protection is also built into the power connector to help preserve the power connector for a long lasting installation.
To Install: First grab a pair of disposable gloves and put them on. Then fill each light strip end connector with the optional silicone glue. Take note of the positive and negative wires on the strips and power cord. When connecting make sure the same wires, positive and positive, negative and negative, connect to each other. Take one strip and insert the light strip firmly so the two inner prongs penetrate the light strip and stop. Take a small amount of glue on on your finger and smear it around the entire end connector where the strip was inserted. Repeat this attaching process with the other strip. Recap the glue and place the assembled strip and interconnector out of the way. We recommend leaving the assembly alone for at least 12 hours to dry thoroughly.
Input Voltage | 110V AC | |
Max Power | 650W | |
Warranty | 3 Year | |
Weight | 0.40 lbs | |
Dimensions | 60 inches Total Length | |
IP Rating | IP67 when used with the optional waterproofing glue | |
Product Color | Transparent Silicone and White Cable | |
Working Temperature | -20-140F | |
Certificates | CE, RoHS |
Customers Questions and Answers
1) Can you provide dimensions for the rectifier and the plug that attaches to the light strip?
It's 3.5" X 1.25" X .75".
Product Rating
Customer Reviews
-
Author: Keylie
I order this connector so I could cut my initial order and make more pieces. Easy to connect and glue. I gave it a 4 star as its only 20 inches long.