3528 Power Connector
The 3528 Power Connector has been created to easily add power to all Driverless 3528 Light Strips. The 3528 Power Connector has a 46" Lead cord with a 2 Prong Plug and can power up to 165 feet of light strip. The light strip end connector requires the optional silicone glue to ensure a waterproof seal. The light strip end connector is made from high grade rigid silicone with UV protection, to help protect the strip and prevent discoloration or corrosion.
To Install: First grab a pair of disposable gloves and put them on. Then fill the light strip end connector with the optional silicone glue. Take note of the positive and negative wires on the strips and power cord. When connecting make sure the same wires, positive and positive, negative and negative, connector to each other. Then insert the strip firmly so the two inner prongs penetrate the light strip and stop. Take a small amount of glue on on your finger and smear it around the entire end connector where the strip was inserted. Recap the glue and place the strip out of the way. We recommend leaving the strip alone for at least 12 hours to dry throughly.
Input Voltage | 110V AC | |
Max Power | 650W | |
Warranty | 3 Year | |
Weight | 0.35 Lbs | |
Dimensions | 20 inches long | |
IP Rating | IP67 when used with optional Silicone Glue | |
Product Color | Transparent Silicone and white cable | |
Working Temperature | -20-140F | |
Certificates | CE, RoHS |