Double Bright RGB LED Strip 16' Kit with Remote Control
Solid Apollo's double bright RGB LED strip 16' kit with color changing remote control has a double bright color changing LED strip that is twice the brightness of a standard RGB LED Strip. It includes absolutely everything you need to make it work. No soldering, no splicing cables, just 1 minute connection and you are ready to go!
The Chroma Flow PRO is a handheld wireless remote control ready to take control of any color changing LED lighting installation by providing immediate color selection, and even the ability to fine tune any color for your exact specification. Over 16,000 colors are possible and can be fully dimmed with the touch of a button. No longer do you have to select several buttons to find the exact color on your mind, now with the color wheel just one touch will immediately change the colors of any location or event where the LED lights are located.
Main Features:
- UL Listed E493881
- Chroma Flow PRO Wireless color changing controller
- Precise color control and color changing
- 10mm Printed Circuit Board Width
- Easy color selection using color wheel
- UL rated power supply and accessories to connect
- Plug and play
- Installs in seconds
Double Bright RGB LED Strip 16' Kit Includes all of the following products:
- 1 x Chroma Flow Pro Wireless Color Changing Controller / Receiver
- 1 x 16 Foot (5m) RGB color changing 72W LED strip with 300 RGB LEDs.
- 1 x 96W 24 power supply (UL listed) with Barrel Connector.
- 1 X female barrel connector and Cable For Easy Power Up.
Choose one of ten color changing programs for added excitement and energy to any atmosphere. Also built in is a button to select one of three shades of white, choose between warm white, daylight white and pure white, for workable light at any moment. The built in memory function even remembers the last setting used after the lights are turned off.
This high quality LED strip includes the following:
- 1 X 16 foot (5m) Double Bright RGB color Changing LED Strip with 300 RGB LEDS
- 1 X Chroma Flow PRO RGB LED Controller / Receiver with color wheel and color changing programs.
- 1 X 96W 24 Volt transformer (UL Listed) with barrel connector.
- 1 X Female barrel connector and cable for easy power up (already installed)
Is it easy to set up?
Yes! You will just take less than a minute:
1. Connect the transformer to the controller with the included barrel connectors.
2. Connect the led strip to the controller through the 4 down screws.
3. Un-spool the led strip
4. Plug the transformer to the wall
5. Place the led strip where desired (double sided 3M tape in the back of the strip) and you are done!
LED Strip Width | 10mm | |
UL Listed | UL Listed E493881 | |
Product Manual | ||
Dimmable | Yes | |
Minimum cut | 4in or 101mm | |
LED Color | RGB color changing | |
Lumens Total | 1800 lm/16.4 Feet | |
Lumens per Foot | 110 Lm | |
Total LEDs | 300 | |
LEDs per Foot | 18 | |
Input Voltage | 24V DC | |
Watts per Foot | 4.4 | |
Watts per Spool | 72W | |
LED Type | Epistar SMD 5050 RGB | |
Beam Angle | 120º | |
Warranty | 3 Years | |
Weight | 1.62 Lbs | |
Dimensions | 8X1.5X1.7 Inches | |
IP Rating | IP33 | |
Control System | PWM RGB | |
RGB Channels | 3 | |
Product Color | White | |
Working Temperature | -4F to 122F | |
Certificates | UL, CE, RoHS |
Customers Questions and Answers
Product Rating
Customer Reviews
-
Author: Marco
Love this Kit, Its way more bright than the last one I got from Amazon. Now I understand why you get what you pay for.
Support was excellent as well as I had some problems installing this kit. Recommend it 100%. -
Author: William K.
Solid Apollo. Thanks for all the support you provided for our installation!