X-Splitter Duowire Outdoor Waterproof Connector
Solid Apollo’s X-Splitter Duowire Outdoor Waterproof Connector is the perfect solution to make your own waterproof connection cables easily. Thanks to its screw based terminal, soldering is not required and installation just takes a few minutes.
Once assembled, the X-Splitter waterproof connector is easy to plug and play while keeping the elements and water out of splices and junctions. To connect and disconnect, just unscrew the main caps and loosen the screws to each wire connections. Each of the X-Splitter's 4-pin connectors has multiple waterproofing levels, consisting of o-rings, waterproof sealant, and flexible end seals designed to secure and close as the caps are tightened.
The X-Splitter Connector's has a waterproof rating of IP67. To assemble, a Philips Screwdriver is required to attach the two wires inside each main body. Once each side is connected and the cap is tightened, the wiring is fully protected from the elements.
Main Features:
- Waterproof Rating of IP67
- Rugged Matte Black Body
- Threaded Plug and Play Main Connector
- O-Rings
- Flexible Tightening End Connectors
- Waterproof Sealant on Main Connectors
- CE and RoHs
Technical Features:
- 25A@24V DC Maximum
- 10A@120V AC Maximum
- 12 AWG Max Cable
Input Voltage | 12-24V DC and 120V AC | |
Max Power | 25A@24V DC 10A@120V AC | |
Warranty | Lifetime | |
Weight | 0.20 Lbs | |
Dimensions | 4in x 0.87in | |
IP Rating | IP67 | |
Product Color | Matte Black | |
Certificates | CE, RoHs |
- Create power cables between fixtures easily
- Works with low voltage or 110V AC
- Perfect for LED landscaping Lights and fixtures