PixelLine LED Strip 5050 72W with White Printed Circuit Board

Solid Apollo’s UL Listed PixelLine RGB LED strip is a state of the art LED Strip that includes a micro controller chip every 3 LEDs for a total of 100 pixels. This gives you the possibility to easily control 100 Pixels  in order to create amazing and jaw dropping effects.  

You can create chasing effects, cascading effects and much more using our PixelDot Controller with 16 pre-defined programs.

Solid Apollo’s LED PixelLine LED strip contains 300 LEDs in every 16.4 foot spool. Each strip has cut points every 2 inches (50mm) containing 3 LEDs per pixel. The PixelLine LED strip’s customizability, especially when paired with one of our PixelLine Controllers, allow for the creation of amazing animated light displays that are sure to grab the attention of customers in retail and commercial environments.

Additionally you can choose between a black or a white printed circuit and a waterproof version that is only available in white printed circuit. Black printed circuits are great when you will use the strip in dark applications like cinemas and music venues; whereas the white printed circuit is great for commercial retail applications.

Each PixelLine RGB 5050 LED strip includes a power and data connector on the beginning and one at the end so multiple units can be connected together. You will just need to use the additional accessories to repower each additional strip.

Additionally you can use Solid Apollo’s mounting Aluminum Channels in order to mount and protect the strip and even use our line of Neonizer Channels which will enable the user to create neon looking effects.

This strip runs at 12V DC. If you connect the strip a higher voltage you will burn the integrated circuits on the strip. This strip is directional, which means that you can only connect it from one side. There are clear arrows showing the direction printed on the Printed Circuit Board.

Additionally you may also use our PixelLine Extension Cables and Repowering Connectors.

**PixelDot Strips are configured as GRB instead of RGB

Main Features:

• 16.4 Feet Long
• 100 Pixels (3 LEDs per Pixel)
• White Printed Circuit Board
• UL Listed
• Full Color RGB
• 12V DC Operation only
• 3 LED / Cut Point
• Cuttable Every 2in
• SPI and DMX Controllable
• Uses 2811 IC
• Double Sided Tape for Easy Installation
• 5 Years Warranty