12mm RGBW Snap&Light LED Strip L Connector
Forget about soldering with Solid Apollo’s new 12mm RGBW Snap&Light LED Strip L Connector. The L connector allows you to easily connect two Solid Apollo RGBW 12mm LED strips together. The L-shape design can tackle tough 90 degree corners without needing additional wiring, providing a clean installation.
The L Connector is very easy to use. Just open both sides of the connector, remove the double sided protection paper from the 12mm RGBW strip, insert and snap!
The 12mm RGBW Snap&Light LED Strip L Connector is only compatible with Solid Apollo 12 mm (0.47”) RGBW LED strips.
Installation:
- Each end of the connector has a white tab that snaps up, revealing a plastic slot to slide the RGBW 12mm LED strip into.
- Peel the double sided tape from the LED strips and insert the led strips facing up (See Product Pictures or Diagram tab for reference)
- Gently push down the white tab until you feel a snap for a secure connection.
Product sold by the unit.
Input Voltage | 12 to 36V DC | |
Max Power | Max 5A | |
Warranty | 3 Years | |
Weight | 0.001 Lbs | |
Dimensions | L: 1.33" x W: 1.33" x H: 0.20" | |
IP Rating | IP33 | |
Product Color | White Connector | |
Working Temperature | 32-170F | |
Certificates | CE-Rohs |
The 12mm RGBW Snap&Light LED Strip L Connector is applicable for the following RGBW LED Strips :
Customers Questions and Answers
Product Rating
Customer Reviews
There have been no reviews for this product.