Accessories and Connectors for 10mm LED Strip Lights

• Great for High Density LED Strips
• Easily Connect Two 10mm LED Strips
• Perfect for Going Around Corners
• Creates Strong, Permanent Connections
• Transparent Connector Heads
• Ultra-low Profile
• Fits Channels 12mm Wide or Larger
• 6.8in in Total Length

• Great for High Density LED Strips
• Easily Connect Two 10mm LED Strips
• Designed for Quick On-Field Installations
• Creates Strong, Permanent Connections
• Transparent Connector Heads
• Ultra-low Profile
• Fits Channels 12mm Wide or Larger
• .64in in Total Length

• Great for High Density LED Strips
• Easily Connect Two 10mm LED Strips
• Perfect for Making 90 Degree Turns
• Creates Strong, Permanent Connections
• Transparent Connector Heads
• Ultra-low Profile
• 1.15in Total Length

• Easily Power any 10mm Strips
• No Need to solder
• Just insert strip and close lid
• 6" Lead Wire

• Easily connects one 10mm Strip to another with a 6" Cable
• Perfect for going around corners
• No Need to solder
• Just insert LED Strip and close lid

• For 10mm Single color LED Strips
• 2-in-1: Power adapter/LED Strip Joiner
• 8 Amp Max Power
• Easily Join two 10mm LED Strips or Provide Power
• 4 x Set down Screws for Strain Relief
• No Soldering Required
• Includes Screwdriver
• Pre-installed 3M Tape for Seamless Installation
• 2 Spade Connectors for Use with Stranded Wire
• Max Wire Gauge: 16 AWG

• Easily Join Two Single Color 5050 72W 10mm LED Strips at a 90 Degree Angle
• 8 Amp Max Power
• 4 Set Down Screws for Strain Relief
• No Soldering Required
• Includes Screwdriver
• Pre-Installed 3M Tape for Seamless Installation
• 4 Spade Connectors for Use with Stranded Wire
• Max Wire Guage: 16 AWG

• Easily Power any 10mm LED Strip
• Includes a female barrel connector
• No Need to solder
• Just insert strip and close lid
• No Need to Connect to extra Female Barrel

• Easily join 2 units  10mm LED Strip Lights
• No Soldering required
• Just insert LED Light strip and close lid

• Easily join 2 units  10mm Single Color LED Strip Lights
• No Soldering required
• Just insert strip and close lid

• Easily connect up to three- 10mm LED Strips together
• No need for solder
• Can be used as a joiner or 90 degree angle change.

• Comes with 10 (10mm) Brackets
• Easily Hold 10mm Wide LED Strip Lights in Place
• Simple Screw-on Design
• Perfect Use for Non-Stick Surfaces
• Place One Bracket Every Foot for Secure Placement

• Easily Connect lead wires to female barrel connector
• 2 X Set down screws for easy connection
• Great for making extension cables
• Great for LED strip re-powering
• Max wire connection Gauge 16AWG
• Max power 5A

• Easily Connect lead wires to male barrel connector
• 2 X Set down screws for easy connection
• Great for making extension cables
• Great for LED strip re-powering
• Max wire connection Gauge 16AWG
• Max power 5A

• Push-Down Connection
• 5A Maximum Per Barrel
• Max Wire Connection Gauge 16AWG
• Spring Clamp Terminal
• Quick Installation with No Extra Tools
• Great for Making Cable Extensions
• Great for LED Strip Re-Powering

• Push-Down Connection
• 5A Maximum Per Barrel
• Max Wire Connection Gauge 16AWG
• Spring Clamp Terminal
• Quick Installation with No Extra Tools
• Great for Making Cable Extensions
• Great for LED Strip Re-Powering

This DC 2-Wire Power Cable wire with 20 gauge is specifically designed to power up any DC LED system.

• UL Listed
• Sold by the foot (Max size 500')
• Color coded 2 wire cable
• 20 AWG Cross section

• UL Listed
• Sold by the Foot (Max Size 500')
• Marked 2 Wire Cable
• 18 AWG Cross Section

• Easily hides and blends with surrounding surfaces
• 21 AWG
• Transparent Jacket
• 2 Wire Cable
• Sold by the foot

• 22 AWG (American Wire Gauge)
• 1 X Female Barrel connector & 2 X  Male Barrel connector outputs
• Create 2 power outputs from 1 transformer or power supply.
• Create 2 outputs from a LED Dimmer or LED Controller
• 20" Length

• 22 AWG (American Wire Gauge)
• 1 X Female Barrel connector & 4 X  Male Barrel connector outputs
• Create 4 power outputs from 1 transformer or power supply.
• Create 4 outputs from a LED Dimmer or LED Controller
• 20" Length

• Fully Waterproof Barrel Splitter
• Compact Design with O-Rings and Screw Connectors
• 1 X Female Barrel Connector & 2 X  Male Barrel Connector Outputs
• Create 2 Power outputs using 1 Transformer or Power Supply
• Create 2 Outputs from an LED Dimmer
• 16.25" Length

• 15' Waterproof extension cable
• 5.5mm Barrel
• Clear color cable -Great for hiding connections
• Includes a male and female barrel connector on each end.
• Can be used with non waterproof LED Light strips as well
• Easily connects to any of our LED strips
• Includes watertight connection with screw-on covers to make each connection 100% waterproof

• 12 Unit Splice connector
• Set down screws for easy connections
• Easily splice cables together
• Better than cable nuts as connections are secured by screws
• Up to 8A per connection
• High grade insulated ABS plastic for secure connections

• 5 Unit Splice connector
• Up to 15 AWG Cables can be connected
• Large Connectors for Adding Multiple Wires in One Terminal
• Set down screws for easy connections
• Easily splice cables together
• Better than cable nuts as connections are secured by screws
• Up to 8A per connection
• High grade insulated ABS plastic for secure connections

• Easily Connect up to 3 Wires to splice power for LED Lighting
• Snap and Lock Functionality provides secure hold
• EasilyBridge Connection between two wires

• Quickly and Easily Connect 5 Wires to Splice Power
• Perfect for 'Backbone" Lighting Installations
• Simple Snap and Lock Design for Secure Connections
• Easily Run 4 Separate LED Lighting Fixtures from One Power Source or LED Dimmer