10mm Snap&Lite Dynamic White Interconnector Cable
Solid Apollo’s 10mm Snap&Lite Dynamic White LED Strip interconnector cable is a very useful accessory enabling you to interconnect 2 Dynamic White 5050 72W LED Strip Light LED strips together. It's the perfect accessory for going around sharp corners, bends, or even through a wall.
This connector uses a "snap" system that makes it very easy to use. Also, thanks to its design, not only does it connect the strip, but it holds in place strongly, avoiding any disconnection due to accidental pulls.
Main uses:
- Interconnect Dynamic White 5050 72W LED Strip Light together
- Interconnect Dynamic White Constant Current PRO-Line 5730 132W LED Strip Light together
- Use to manuever sharp corners and bends
- To Power-up Dynamic White LED strips
Advantages:
- Easier to use than traditional low end connectors
- Keeps the strip in place, even when there are pulls.
Installation is Easy in Just 4 Quick Steps:
- Open the click on cover
- Peel back the double sided tape from the 10mm Dynamic White LED Strip
- Carefully insert the LED Strip Light
- Close the click on cover firmly.
Please Note: This accessory is compatible with the Dynamic White 5050 72W LED Strip Light & Dynamic White Constant Current PRO-Line 5730 132W LED Strip Light.
Product Sold by the Unit.
| Input Voltage | 12 to 36V DC | |
| Max Power | Max 5A | |
| Warranty | 3 Years | |
| Weight | 0.001 Lbs | |
| Dimensions | 5.5" x 0.63" x 0.18" | |
| IP Rating | IP33 | |
| Product Color | White Connector | |
| Working Temperature | 32-170F | |
| Certificates | CE-Rohs | |
